Broom Finish On Concrete

If you’re looking for a simple and cost-effective way to add texture and slip resistance to your concrete surface, broom finishing might be the perfect solution for you.

Table of Contents

Broom finish is a popular technique used in the construction industry to achieve a rough, non-slip surface on concrete floors, sidewalks, patios, and driveways.

Broom finishing is achieved by running a broom over the surface of freshly poured concrete, leaving behind a series of parallel grooves that provide traction and make the surface less slippery.

This technique is ideal for outdoor areas that are exposed to rain, snow, or other wet conditions, as it helps prevent slips and falls.

In this article, you’ll learn everything you need to know about broom finishing concrete, including the benefits, tools and materials required, and step-by-step instructions for achieving a smooth and uniform finish.

What is Broom Finishing and How Does it Work?

You can create a textured surface on freshly poured concrete by dragging a stiff-bristled tool across the wet surface, resulting in a rough, slip-resistant surface. This technique is known as broom finishing, and it’s a popular choice for outdoor surfaces like patios, driveways, and sidewalks.

Broom finishing is a simple and inexpensive way to add traction to your concrete surface and prevent slips and falls. The process of broom finishing begins once the concrete has been poured and leveled. A broom with stiff bristles is then dragged across the surface in a pattern, creating textured grooves that help to prevent slips and falls.

The depth and spacing of the grooves can be adjusted depending on the desired level of slip resistance. After the broom finishing is complete, the concrete is left to dry and cure. Broom finishing is an excellent choice for outdoor surfaces that are likely to get wet, such as pool decks and walkways.

It’s also a popular choice for commercial and industrial settings where safety is a top priority. By adding texture to your concrete surface, you can reduce the risk of slip and fall accidents and create a safe, functional space for you and your guests to enjoy.

Benefits of Broom Finish on Concrete Surfaces

When you walk on a freshly poured concrete surface, you’ll be amazed at the unique texture that can be achieved through a special application process called broom finishing. This process involves dragging a broom across the surface of the concrete to create a rough, slip-resistant texture.

One of the main benefits of broom finish on concrete surfaces is that it provides traction, making it less likely for someone to slip or fall. Another benefit of broom finish on concrete surfaces is that it adds visual interest. Broom finishing creates a pattern on the surface of the concrete, giving it a unique and textured look. This can be especially helpful for outdoor spaces, such as pool decks or patios, where a plain concrete surface might look dull and uninviting.

Finally, broom finish on concrete surfaces can also be a cost-effective option. Compared to other decorative concrete finishes, such as stamped concrete or exposed aggregate, broom finishing is relatively simple and inexpensive. This makes it a great option for those who want to enhance the look and safety of their concrete surfaces without breaking the bank.

Tools and Materials Required for Broom Finishing

To achieve that rough, slip-resistant texture on your freshly poured concrete surface, you’ll need to gather some tools and materials before getting started. The most important tool is a stiff-bristled broom, which will create the signature texture that defines a broom finish.

You’ll also need a finishing trowel to level the surface, a concrete mixer to mix the cement, and a wheelbarrow to transport the mixture. Aside from these main tools, you’ll also need some smaller materials to ensure a successful broom finish.

These include safety glasses and gloves to protect yourself from splashes of wet concrete, a measuring tape to ensure accurate mixing ratios, and a concrete sealer to protect the finished surface from weathering. Finally, you’ll need a spray bottle filled with water to mist the surface before brooming, which will prevent the concrete from drying too quickly and provide a better texture.

Using these tools and materials, you can achieve a professional-looking broom finish on your concrete surface. Remember to follow the manufacturer’s instructions for mixing and applying the concrete, and to work quickly to achieve the desired texture before the mixture dries.

With practice, you’ll be able to create beautiful, slip-resistant surfaces that will last for years to come.

Preparing Your Concrete Surface for Broom Finishing

Before you can achieve that rough texture on your newly poured surface, it’s important to properly prepare the concrete. This involves a few key steps that will ensure the best results for your broom finish. Here’s what you need to do:

  • First, make sure the concrete has fully cured before attempting to apply the broom finish. This typically takes about 28 days.

  • Next, use a pressure washer to clean the surface of any dirt, debris, or loose particles. This will help the broom finish adhere properly.

  • If there are any cracks or holes in the surface, fill them with a patching compound and allow it to dry completely.

  • Finally, use a concrete degreaser to remove any oil or grease stains that may be present. This will prevent discoloration and ensure a consistent finish.

Once you’ve completed these steps, you can move on to applying the broom finish. By taking the time to prepare the surface properly, you’ll ensure that your broom finish looks great and lasts for years to come. So don’t skip this important step – it’s well worth the effort!

Applying the Broom Finish Technique

You’re ready to add a touch of texture to your smooth and newly poured surface, creating a rustic and visually appealing look that will make your concrete stand out. To achieve this, you’ll need to apply the broom finish technique.

Begin by pouring the concrete and waiting until it’s firm enough to support your weight without leaving an indentation. Then, use a special broom with long, coarse bristles to create the texture.

When it’s time to start broom finishing, begin at the farthest corner from your exit point and work your way towards the door. Hold the broom at a 45-degree angle and make long, even strokes across the surface. Try to overlap each stroke slightly to ensure complete coverage. Be sure to keep the broom moist by dipping it in water occasionally.

As you work, keep an eye out for any areas that you may have missed. If you notice any, simply go back over them with the broom until you’re satisfied with the texture.

Once you’ve covered the entire surface, let the concrete dry completely before walking on it. With a little bit of patience and some elbow grease, you’ll have a beautiful broom finished concrete surface that will add character and charm to your home or business.

Tips for Achieving a Smooth and Uniform Finish

Now that you know how to apply the broom finish technique, it’s time to focus on achieving a smooth and uniform finish. This is crucial, as a poorly executed finish can detract from the overall appearance of your concrete surface. But don’t worry, with a few tips and tricks, you can achieve a professional-looking finish every time.

Firstly, make sure to use a broom with long and flexible bristles. This will allow for better control and coverage of the surface.

Secondly, ensure that the concrete is at the right moisture level before applying the finish. A surface that is too wet or too dry can result in an inconsistent finish.

When applying the broom finish, use long and even strokes. This will help distribute the concrete evenly and avoid any unsightly lines or streaks.

Lastly, remember to keep the broom clean throughout the process. Build-up of excess concrete on the bristles can cause clumping and lead to an uneven finish.

By following these tips, you can achieve a smooth and uniform broom finish on your concrete surface. Remember to take your time and pay attention to detail, as this can make all the difference in achieving a professional-looking finish.

Maintaining and Cleaning Your Broom Finished Surface

Maintaining and cleaning your broom finished surface is essential for keeping it looking pristine and ensuring its longevity.

The first step in maintaining your broom finished surface is to regularly sweep away any debris or dirt that may accumulate on it. This will prevent it from scratching the surface and causing damage over time. You can use a soft-bristle broom or a vacuum with a soft-bristle attachment to get rid of any dirt or debris.

Another important step in maintaining your broom finished surface is to clean it periodically. You can use a mild detergent or a specialized concrete cleaner to remove any stains or marks on the surface. Make sure to follow the manufacturer’s instructions and use a soft-bristle brush or a microfiber cloth to avoid scratching the surface.

Rinse the surface thoroughly with water after cleaning to remove any residue.

Finally, it’s important to protect your broom finished surface from any potential damage. Avoid using harsh chemicals or abrasive materials on the surface, as they can cause scratches and dull its appearance. You can also apply a sealant to the surface to protect it from stains and scratches.

With proper maintenance and care, your broom finished surface will remain beautiful and functional for years to come.

Broom Finish Variations and Design Options

There are various design options available for achieving a unique and customized look for your broom finished surface. One option is to add color to the concrete mix before pouring, which can create a subtle tint or a bold statement. Another option is to use different broom textures or patterns, such as a swirl or diamond pattern, to add visual interest. Additionally, you can choose to add decorative elements to the surface, such as stamped patterns or exposed aggregate.

When selecting a broom texture or pattern, consider the area where the concrete will be installed and the purpose it will serve. For example, a smooth broom finish may be suitable for a pool deck, while a more textured pattern may be better for a driveway to provide additional traction. It’s also important to consider the overall aesthetic of the space, and choose a broom texture or pattern that complements the surrounding landscape and architecture.

Ultimately, the design options for a broom finished surface are endless. By thinking outside the box and using creative techniques, you can achieve a truly unique and custom look that enhances the beauty and functionality of your space. Whether you’re looking to create a sleek and modern look or a more rustic and natural feel, there’s a broom finish variation that can help you achieve your desired outcome.

When to Hire a Professional for Broom Finishing Projects

Sometimes it’s best to enlist the help of a professional for achieving a polished and expertly finished surface when it comes to broom finishing projects.

While it may seem like a simple process, there are many factors that can affect the final outcome of the surface. For example, the type of broom used, the angle at which it’s held, and the amount of pressure applied can all impact the final appearance of the surface.

A professional with experience in broom finishing will be able to navigate these variables with ease and produce a high-quality finish. Another reason to consider hiring a professional for a broom finishing project is the equipment required.

Depending on the scale of the project, specialized equipment such as power trowels and screeds may be necessary. A professional will likely have access to this equipment and the knowledge to use it effectively, which can save time and ensure a more precise finish.

Additionally, a professional will be able to assess any potential challenges or issues that may arise during the project, and take steps to address them before they become bigger problems. Overall, while it may be tempting to save money and attempt a broom finish yourself, there are many benefits to hiring a professional.

A professional will have the experience, equipment, and knowledge necessary to create a polished and expertly finished surface. Additionally, hiring a professional can save time and prevent potential issues from arising.

When it comes to broom finishing projects, it’s often worth the investment to ensure a high-quality finish.


Now that you know how to achieve a beautiful broom finish on your concrete surface, it’s time to get started! Remember to gather all the necessary tools and materials before beginning your project.

Take your time and follow each step carefully to achieve a smooth and uniform finish. Once your broom finished surface is complete, it’s important to properly maintain and clean it to keep it looking its best. Consider using a sealant to protect your surface from stains and damage.

If you’re not confident in your ability to achieve the desired result, don’t hesitate to hire a professional. Broom finishing is a skill that takes practice and experience, but with patience and determination, you can create a stunning and durable concrete surface that will last for years to come.